Gtechniq Auto EXO & Crystal Serum Light - 50ml

EXO & Crystal Serum Light - 50ml

Crystal Serum Light is an outstanding standalone ceramic coating for gloss retention and exceptional scratch resistance, protecting your car’s paint from swirl marks and environmental damage. For car enthusiasts who want the best ceramic coat protection available, combining these two products is the answer.

This kit combines Crystal Serum Light’s protection and chemical resistance with EXOv5’s extreme hydrophobic properties, giving your vehicle a high-gloss finish that repels water, bird droppings, and contaminants. It’s ideal for daily drivers and show cars alike. Whether you’re shielding factory paint on a new vehicle or restoring your previous car after paint correction, this combination creates a durable sacrificial layer that makes maintenance washes effortless while preserving your clear coat for years.

Crystal Serum Light

• Chemical resistance from a prosumer-grade product
• Incredible gloss
• Up to 5 years durability

EXOv5 Ultra Durable Coating

• Improved durability
• Same great gloss, water and dirt repellency
• Significantly easier to apply

Simple steps to help you get the best results:

Using a new product on your vehicle may cause some hesitation, and our team understands that. However, at Gtechniq, we make the application process simple and effective. To get the best results from Crystal Serum Light, follow these steps:

• To apply Crystal Serum Light (CSL), make sure your vehicle is indoors and can stay indoors for 12 hours after application. Do not apply in direct sunlight.
• Only apply the product at a temperature between 5°C and 25°C.
• Shake well and wear gloves.
• Wash and decontaminate your paintwork thoroughly before application. If required, polish your paintwork, either by machine or hand, to remove any imperfections.
• Spray Panel Wipe into a Gtechniq MF1 Microfibre Cloth and wipe down each panel in small sections.
• Soak the application pad with 3 full measures of CSL from the pipette and work the liquid into the pad to get an even saturation.
• Replace the lid on the bottle and set aside – do not keep the bottle in your hand as this promotes premature curing.
• Apply in overlapping strokes to an area roughly 2ft by 2ft, or work to the body lines of the vehicle.
• Immediately remove residue with an MF1 cloth – you may need to buff the same area several times, but avoid doing it with too much force. We recommend the use of 2 cloths at any one time. Make sure the cloths are rotated during residue removal to prevent CSL curing in the cloth – this can make buffing residue difficult.
• Inspect the surface for residue with a bright, diffused light source.
• If you remove residue and it cures fully, you should polish the area and reapply CSL.
• As soon as you finish, put your MF1 cloths in water, wash, and dry them as soon as possible.
• Wait approximately 2 hours after applying CSL before applying EXO Ultra Durable Hydrophobic Coating or C2 Liquid Crystal.
• Store in a cool, dry place.
• Use within 3 months of opening.