View All Sprockets
32 tooth camshaft sprocket primarily (though not exclusively) associated with 50cc, 70cc, 90cc, 110cc and 125cc engines, three bolt mount. Approximate dimensions:
Outside Diameter: 67.2mm
Ce...
33 tooth camshaft sprocket primarily (though not exclusively) associated with 50cc, 70cc, 90cc, 110cc and 125cc engines, three bolt mount. Approximate dimensions:
Outside Diameter: 62.4mm
Ce...
This 36 tooth camshaft gear applies to (and is not limited to) 150cc to 400cc engines. Most commonly used for 260cc and 300cc ATVs, dirt bikes, scooters, buggies and other motorized vehicles from a ...
Pocket Bike Sprocket Big 7T. This sprocket has the smaller threaded spindle and works with HS25 chain. Approximate length is 3.5cm. Threaded spindle diameter of 9mm and is 1.1cm long. ...
Pocket Bike Sprocket Small 6T. This sprocket has a larger threaded spindle. Approximate length is 3.5cm. Threaded spindle diameter of 9mm and is 1.1cm long. ...
On Back Order
Reserve it now. |
This 17 mm lock sprocket applies to (and is not limited to) 125cc engines. Lock sprocket is 4.2 cm long, 2.5cm wide, 0.2cm thick and the mounting holes are 3cm apart center to center. ...
This 20mm lock sprocket applies to (and is not limited to) 125cc engines. Most commonly used for 125cc manual shift dirt bike engines. Applies to most 125cc kick start and electric start engines. Loc...
Lock Sprocket Bolt - 2pcs ...
These rubber boots are most commonly used for (but not limited to) 50cc, 70cc, 90cc, 110cc, 125cc, 140cc, 150cc, 200cc and 250cc dirt bikes. These shoes are commonly used to mount either (or both) th...
This 11 tooth procket and fits with the 420 size chain. Most commonly used on 50cc to 250cc ATVs and dirt bikes. Approximate dimensions:
Outside Diameter: 48.1mm
Centre Hole Diameter: 17.1...
This 11 tooth front sprocket works with the 420 chain. Most commonly used on 50cc to 250cc ATVs and dirt bikes. NOTE: There are NO dual mounting holes as seen above in picture. Only center hole. App...
This 11 tooth front sprocket works with the 420 chain. Most commonly used on 50cc to 250cc ATVs and dirt bikes. Approximate dimensions:
Outside Diameter: 48.5mm
Centre Hole Diameter: 20.1m...
This 11 tooth 428sprocket works with the 428 chain. Most commonly used on 50cc to 250cc ATVs and dirt bikes. Approximate dimensions:
Outside Diameter: 48.2mm
Centre Hole Diameter: 17mm
...
This 11 tooth sprocket works with the 428 chain. Most commonly used on 50cc to 250cc ATVs and dirt bikes. Approximate dimensions:
Outside Diameter: 48.7mm
Centre Hole Diameter: 20mm
Thi...
This 11 teeth sprocket fits with T8F / 8mm / BF05T chain. Sprocket has a diameter of 3cm and total thickness of 1.2cm. ...
This 12 tooth performance front sprocket and fits a 420 size chain. Approximate dimensions:
Outside Diameter: 53mm
Centre Hole Diameter: 17mm
Thickness: 6.1mm
Associated Parts...
This 12 tooth performance front sprocket and fits 420 size chain. Approximate dimensions:
Outside Diameter: 53.1mm
Centre Hole Diameter: 20.1mm
Thickness: 7mm
...
This 12 tooth performance front sprocket and fits a 428 size chain. Most commonly used for 125cc and 140cc dirt bikes. *** CURRENT BATCH HAS BOLT HOLES. ***
Approximate dimensions:
Outside ...
This 12 tooth performance front sprocket works with the 428 chain. Approximate dimensions:
Outside Diameter: 53.5mm
Centre Hole Diameter: 20mm
Thickness: 6.8mm
...
This 13 tooth performance front sprocket and fits with 420 size chain. Approximate dimensions:
Outside Diameter: 55.3mm
Centre Hole Diameter: 17.1mm
Thickness: 5.8mm
Associate...
This 13 tooth performance front sprocket and works with the 420 size chain. Approximate dimensions:
Outside Diameter: 56.1mm
Centre Hole Diameter: 20.1mm
Thickness: 6mm
Associ...
This 13 tooth performance front sprocket works with the 428 chain. Most commonly used for 125cc and 140cc dirt bikes. Approximate dimensions:
Outside Diameter: 55mm
Centre Hole Diameter: 17...
This 13 tooth performance front sprocket works with 428 chain. Approximate dimensions:
Outside Diameter: 55.2mm
Centre Hole Diameter: 20mm
Thickness: 6.7mm
Associated Parts:
...
This 14 tooth performance front sprocket works with the420 size chain. ATA110B/D/F/H/L, ATA125A/D/E/G/H/T,ATA135D Tao Tao. Approximate dimensions:
Outside Diameter: 61.1mm
Centre Hole Diam...
This 14 tooth performance front sprocket works with the 420 size chain. Approximate dimensions:
Outside Diameter: 61mm
Centre Hole Diameter: 20.1mm
Thickness: 5.9mm
Associated...
This 14 tooth performance front sprocket works with 428 chain. Approximate dimensions:
Outside Diameter: 61mm
Centre Hole Diameter: 17mm
Thickness: 6.9mm
Associated Parts:
...
This 14 tooth performance front sprocket works with the 428 chain. Approximate dimensions:
Outside Diameter: 61mm
Centre Hole Diameter: 20mm
Thickness: 6.9mm
Associated Parts:...
This 14 tooth performance front sprocket works with the 428 chain. Approximate dimensions:
Outside Diameter: 60.9mm
Centre Hole Diameter: 20mm
Thickness: 7mm
...
This 14 teeth sprocket fits with T8F / 8mm / BF05T chain. Approximate outer diameter (OD) is 4cm. ...
This 15 tooth performance front sprocket works with the 420 size chain. Approximate dimensions:
Outside Diameter: 65mm
Centre Hole Diameter: 17.1mm
Thickness: 5.8mm
Associated ...
This 15 tooth performance front sprocket works with the 420 size chain. Approximate dimensions:
Outside Diameter: 64.7mm
Centre Hole Diameter: 20.1mm
Thickness: 6mm
Associated...
This 15 tooth performance front sprocket works with the 428 chain. Approximate dimensions:
Outside Diameter: 65mm
Centre Hole Diameter: 17mm
Thickness: 6.9mm
Associated Parts:
...
This 15 tooth performance front sprocket works with the 428 chain. Approximate dimensions:
Outside Diameter: 64.8mm
Centre Hole Diameter: 20mm
Thickness: 6.5mm
Associated Parts...
This 15 tooth performance front sprocket works with the 428 chain. Approximate dimensions:
Outside Diameter: 65mm
Centre Hole Diameter: 20mm
Thickness: 6.9mm
...
This 15 tooth performance front sprocket works with the 520 chain. Approximate dimensions:
Outside Diameter: 65.1mm
Centre Hole Diameter: 20mm
Thickness: 6.7mm
Associated Parts...
This 16 tooth performance front sprocket and works with 420 size chain. Approximate dimensions:
Outside Diameter: 69.2mm
Centre Hole Diameter: 17.1mm
Thickness: 6mm
Associated ...
This 16 tooth performance front sprocket works with the 420 chain. Approximate dimensions:
Outside Diameter: 68.2mm
Centre Hole Diameter: 20mm
Thickness: 5.9mm
Associated Parts...
This 16 tooth performance front sprocket works with the 428 chain. Approximate dimensions:
Outside Diameter: 69.1mm
Centre Hole Diameter: 17mm
Thickness: 7mm
Associated Parts:
...
This 16 tooth performance front sprocket works with the 428 chain. Approximate dimensions:
Outside Diameter: 68.1mm
Centre Hole Diameter: 20mm
Thickness: 6.9mm
Associated Parts...
This 16 tooth performance front sprocket works with the 520 chain. Approximate dimensions:
Outside Diameter: 69.1mm
Centre Hole Diameter: 20mm
Thickness: 6.8mm
Associated Parts...
This 17 tooth performance front sprocket works with the 420 chain. Approximate dimensions:
Outside Diameter: 73.2mm
Centre Hole Diameter: 17mm
Thickness: 5.8mm
Associated Part...
This 17 tooth performance front sprocket works with the 420 chain. Approximate dimensions:
Outside Diameter: 73.1mm
Centre Hole Diameter: 20mm
Thickness: 7.1mm
Associated Parts...
This 17 tooth performance front sprocket works with the 428 chain. Approximate dimensions:
Outside Diameter: 72.9mm
Centre Hole Diameter: 17mm
Thickness: 6.9mm
Associated Part...
This 17 tooth performance front sprocket works with the 428 chain. Approximate dimensions: Outside Diameter: 72.9mm
Centre Hole Diameter: 17mm
Thickness: 6.9mm
Associated Parts: 20A1917 Lock sprock...
This 17 tooth performance front sprocket works with the 428 chain. Approximate dimensions:
Outside Diameter: 72.9mm
Centre Hole Diameter: 20mm
Thickness: 6.9mm
Associated Parts...
This 17 teeth sprocket fits with T8F / 8mm / BF05T chain. Sprocket has a diameter of 4.7cm and total thickness of 1.2cm. ...
Pocket Bike Sprocket Big 6T. This sprocket has a total length of 3.8cm. Threaded spindle has a length of 1.3cm with a diameter of 0.9cm. ...
Pocket Bike Sprocket Big 7T. This sprocket has a total length of 3.8cm. Threaded spindle has a length of 1.3cm with a diameter of 0.9cm. ...
Pocket Bike Sprocket Small 6T. This sprocket has a total length of 3.7cm. Threaded spindle has a length of 1.2cm with a diameter of 0.8cm. ...
Pocket Bike Sprocket Small 6T. This sprocket has a total length of 35.3mm. Threaded spindle has a length of 12mm with a diameter of 7.75mm.
Outside Diameter: 35.3mm
Centre Hole Diameter: 12mm
...
This 30 tooth rear sprocket is made from hardened, corrosion resistant steel. Commonly (though not exclusively) used for 50cc to 500cc dirt bikes, ATVs, go karts and buggies. Approximate dimensions:...
On Back Order
Reserve it now. |
This 33 tooth rear sprocket is made from hardened, corrosion resistant steel. Commonly (though not exclusively) used for 50cc to 500cc dirt bikes, ATVs, go karts and buggies. Approximate dimension...
This 34 tooth rear sprocket is made from hardened, corrosion resistant steel. Commonly (though not exclusively) used for 50cc to 500cc dirt bikes, ATVs, go karts and buggies. Approximate dimensions:
...
On Back Order
Reserve it now. |
This 36 tooth rear sprocket is made from hardened, corrosion resistant steel. Commonly (though not exclusively) used for 50cc to 500cc dirt bikes, ATVs, go karts and buggies. Approximate dimension...
On Back Order
Reserve it now. |
This 34 tooth rear sprocket is made from hardened, corrosion resistant steel. This sprocket is a direct fit for the bulk of the standard rim sizes we carry. Commonly (though not exclusively) used ...
This 35 tooth rear sprocket is made from hardened, corrosion resistant steel. Commonly (though not exclusively) used for 50cc to 500cc dirt bikes, ATVs, go karts and buggies. Approximate dimensions: O...
This 35 tooth, 428 chain rear sprocket is made from hardened, corrosion resistant steel. Commonly (though not exclusively) used for 50cc to 500cc dirt bikes, ATVs, go karts and buggies. Approximate ...
This 36 tooth rear sprocket is made from hardened, corrosion resistant steel. Commonly (though not exclusively) used for 50cc to 500cc dirt bikes, ATVs, go karts and buggies. Approximate dimensions...
This 36 tooth rear sprocket is made from hardened, corrosion resistant steel. Commonly (though not exclusively) used for 50cc to 500cc dirt bikes, ATVs, go karts and buggies. Approximate dimensions...
This 36 tooth rear sprocket is made from hardened, corrosion resistant steel. Commonly (though not exclusively) used for 50cc to 500cc dirt bikes, ATVs, go karts and buggies. Approximate dimensions...
This 37 tooth rear sprocket is made from hardened, corrosion resistant steel. This sprocket is a direct fit for the bulk of the standard rim sizes we carry.
Commonly (though not exclusively) use...
This 37 tooth rear sprocket is made from hardened, corrosion resistant steel. Commonly (though not exclusively) used for 50cc to 500cc dirt bikes, ATVs, go karts and buggies. Approximate dimensions:...
This 37 tooth rear sprocket is made from hardened, corrosion resistant steel. Commonly (though not exclusively) used for 50cc to 500cc dirt bikes, ATVs, go karts and buggies. Approximate dimension...
This 37 tooth rear sprocket is made from hardened, corrosion resistant steel. Commonly (though not exclusively) used for 50cc to 500cc dirt bikes, ATVs, go karts and buggies. Approximate dimensions:...
This 38 tooth rear sprocket is made from hardened, corrosion resistant steel. Commonly (though not exclusively) used for 50cc to 500cc dirt bikes, ATVs, go karts and buggies. Approximate dimensions:...
This 38 tooth rear sprocket is made from hardened, corrosion resistant steel. Commonly (though not exclusively) used for 50cc to 500cc dirt bikes, ATVs, go karts and buggies. Approximate dimensions:...
This 38 tooth rear sprocket is made from hardened, corrosion resistant steel. Commonly (though not exclusively) used for 50cc to 500cc dirt bikes, ATVs, go karts and buggies. Approximate dimensions:...
This 40 tooth rear sprocket is made from hardened, corrosion resistant steel. Commonly (though not exclusively) used for 50cc to 500cc dirt bikes, ATVs, go karts and buggies. Approximate dimensions...
This 40 tooth rear sprocket is made from hardened, corrosion resistant steel. Commonly (though not exclusively) used for 50cc to 500cc dirt bikes, ATVs, go karts and buggies. Approximate dimensions:...
On Back Order
Reserve it now. |
This 41 tooth rear sprocket is made from hardened, corrosion resistant steel. Commonly (though not exclusively) used for 50cc to 500cc dirt bikes, ATVs, go karts and buggies. TaoTao product number ...
This 41 tooth rear sprocket is made from hardened, corrosion resistant steel. Rear drive assembly included. Commonly (though not exclusively) used for 50cc to 500cc dirt bikes, ATVs, go karts and b...
This 41 tooth rear sprocket is made from hardened, corrosion resistant steel. Associated sprocket for many of the rim and wheel assemblies that we carry. ...
This 42 tooth rear sprocket is made from hardened, corrosion resistant steel. Commonly (though not exclusively) used for 50cc to 500cc dirt bikes, ATVs, go karts and buggies. Approximate dimensions:...
This 42 tooth rear sprocket is made from hardened, corrosion resistant steel. Commonly (though not exclusively) used for 50cc to 500cc dirt bikes, ATVs, go karts and buggies. Approximate dimensions:...
On Back Order
Reserve it now. |
This 54 tooth rear sprocket is made from hardened, corrosion resistant steel. Fits with T8F / 8mm / BF05T chain. Used for a wide range of powersport applications and has become popularly used for 2-...
This 68 tooth rear sprocket is made from hardened, corrosion resistant steel. Commonly (though not exclusively) used for pocket dirt bikes, ATVs, go karts and buggies. Approximate dimensions:
...
Sprocket Set - Rear 420-41T, Front 420-14T. JH70
Rear Sprocket:
Outside Diameter: 170mm
Centre Hole Diameter: 54.3mm
Mounting Hole (centre-centre): 50mm
Mounting Hole (centre-centr...
On Back Order
Reserve it now. |
Sprocket Set - Rear 428-38T, Front 428-15T. WY125
Rear Sprocket:
Outside Diameter: 159mm
Centre Hole Diameter: 57.9mm
Mounting Hole (centre-centre): 63mm
Mounting Hole (centre-cent...
Sprocket Set - Rear 428-46T, Front 428-14T. JH125
Rear Sprocket:
Outside Diameter: 190mm
Centre Hole Diameter: 58.1mm
Mounting Hole (centre-centre): 62mm
Mounting Hole (centre-cent...
Timing sprocket. Commonly used for (but not limited to) 500cc engines, such as the Hisun 500cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines.
These machines are...
On Back Order
Reserve it now. |
