Interlux Ultra w/ Biolux Hard Antifouling Paint - MW

Name: Interlux Ultra w/ Biolux Hard Antifouling Paint - MW
Brand: Interlux Paint (MW)
SKU: ILX-Y3449G.1
Availability: InStock

SKU ILX-Y3449G.1 MFR Interlux Paint (MW)

Express

Toronto, ON Vancouver, BC NJ, Warehouse FL, Warehouse

"Express" items are automated and typically shipped out the next available business day and delivered within 4 days.

In Stock

Purchasing Code Required

To order this product online, please contact us with the quantity you need and your ZIP / postal code to receive your purchasing code. Some locations are restricted at this time.

Request Purchasing Code

Already have a code? Enter it below to unlock pricing and purchasing.

Ask a question about this product

Back to: Hard Bottom Paint

Interlux Ultra w/ Biolux Hard Antifouling Paint

Interlux Ultra with Biolux is an antifouling paint specially formulated for long-term protection in high fouling water. Ultra offers great coverage and a hard, durable finish. The Biolux boost helps control slime, making this paint great for areas where there is a high level of shell and algae growth.

Fast drying formula with Biolux technology that reduces slime
Hard, long lasting formula for fiberglass, wood and steel
A hard, high solids, high performance antifouling
Low VOC reduces overall solvent emissions

Specifications:

Type of antifouling: Hard
Suitable water types: Sea water, fresh water, brackish water
Recommended number of coats: 2
Finish: Matte
Brush coverage: 410 sq. ft. per gallon

Interlux Ultra can be applied by brush and roller by DIYers and airless spray and conventional spray for professionals.

How to Apply Interlux Ultra w/ Biolux Hard Antifouling Paint

Preparation

Previously Painted Surfaces

In good condition, remove loose paint by sanding with 80 grit paper, then wipe with special thinner 216.
In poor condition, remove antifouling paint with Interstrip Semi-Past 299E.

Bare Fiberglass

Begin by scurbbing well using soap and water and a stuff brush. Rinse with fresh water and allow to dry. Wipe a small area with a clean rag that has been wetted with Fiberglass Solvent Wash 202. While the surface is still wet, wipe with a clean, dry rag. Continue this process until the entire surface gas been cleaned.
Sand with 80 grit paper. Remove sanding residue. Wipe with Fiberglass Solvent Wash 202. Once the hull is contaminant-free and dry, apply the first coat of primer.

Bare Wood

Sand with 80 grit paper. Remove sanding residue. Apply first coat reduced 10% with Special Thinner 216. If primer is preferred, use Primocon YPA984. Fill seams, if necessary, with Seam Compound Brown 30.

Steel

Prime with Interprotect 2000E to achieve 10 mils total dry film thickness.

Application

At least 2 coats should be applied, or a minimum of 4 mils dry film thickness.

Thinner: Brush Ease 433. Thin no more than 10%.
Airless Spray Pressure: 170-204 bar/2500-3000 psi. Tip Size: 0.53 mm/21 thou.
Conventional Spray Pressure Pot: Pressure - 4.08-4.76 bar/60-70 psi (gun pressure); 10-15 psi(pot pressure). Tip Size: 1.8-2.2mm/70-85 thou.
Roller: Use a 3/8" nap solvent resistant roller.

Click to Download Interlux Ultra w/ Biolux Hard Antifouling Paint Application Instructions